Detailed Product Description

 Smartgen Controller DESCRIPTION

 

The Model 300 is an Automatic Engine Control Module. The module is used to automatically start and stop the engine, indicating the operational status and fault conditions, automatically shutting down the engine and indicating the engine failure by LED on the front panel. Selected timers and alarms can be altered by the customer from the test software on PC.

 

Operation of the module is via a threeposition rotary switch (key-switch optionavailable) mounted on the front panelwith STOP, AUTO and MANUALpositions.

Microprocessor control

The module features microprocessor control and a comprehensive list of timers and pre-configured sequences. This allows demanding specifications to be achieved.

 

Digital inputs

Low Oil Pressure

High Engine Temperature

Remote Start.

4 fully configurable auxiliary inputs

 

This allows the module to function with normally open switches. Four fully configurable auxiliary inputs are provided to give protection expansion. these can be selected to be indication, warning or shutdown inputs either immediate or held off during start up.

 

Relay outputs

Fuel Solenoid Output

Start Output

4 configurable outputs.

 

The 4 configurable relay functions can be selected from a range of different functions, conditions or alarms.

 

 

Multiple alarm channels are provided to monitor the following:

Under/Overspeed

Charge Fail

Emergency Stop

Low oil pressure

High engine temperature

Fail to Start

Fail to stop

Loss of speed sensing

Programmable inputs as selected

 

SPECI F ICATION

 

DC Supply:

8 to 35 V Continuous.

 

Max. Operating Current:

200mA at 12 V & 150mA at 24 V.

 

Alternator Input Range:

50V(ph-N) to 300V(ph-N) AC

 

Alternator Input Frequency:

50 - 60 Hz at rated engine speed

(Minimum: 35V AC Ph-N)

 

Magnetic Pick-up Voltage Input Range:

+/- 3 V to 70 V Peak

 

Magnetic Input Frequency:

10,000 Hz(max)

 

Start Relay Output:

10 Amp DC at supply voltage.

 

Fuel Relay Output:

10 Amp DC at supply voltage.

 

Auxiliary Relay Outputs:

Auxiliary output1 - 3: 10 Amp DC at supply voltage