Detailed Product Description

Standard Genset Features:

Cummins water cooled diesel engine,

Oil and fuel filter fitted, water separator

Lube-oil drain valve fitted

Electric starter & Charge altimeter 24v DC

Electronic governor

Normal duty air filter

Single bearing alternator, class H /IP21

Standard voltage 400/230 volts, 50Hz

Exciter/Voltage reg-Torque Match as standard

SmartgenHGM6310 with Bargraph as standard 

3-circuit breaker

Welding steel base with vibration block base

Silencer

Starting storage battery

Green body, black base

Contract plastic film for package

Manual and machinery descriptions

Tag of standard configuration

Generator Set Performance:

Voltage Regulation

Maintains voltage output to within ±1.0%

At any power factor between 0.9 and 1.0

At any variations from no load to full load.

At any variations from cold to hot.

At speed droop variations up to 4.5%

Frequency Regulation

Isochronous under varying loads from no

load to 100% full load when electronic is

fitted

Random Frequency Variation

Will not exceed±0.25% of its mean value

For constant loads no load to full load.

Waveform

Total harmonic distortion open circuit

Voltage waveform in the order of 1.8%.

Three-phase balanced load in the order of

5.0%

Alternator Temperature Rise

Class H insulation.

Generator Set Options:

       Noise proof generator

       Trailer generator

       Heat interchanger - water tank

cooling system

       Residential exhaust silencer

       Daily-use fuel tank 600L or

1000L

       Thermostat heater with water

tank

       Fuel water separator

       Low water level and low fuel

alarm

       Anti-condensation heater

generator

       Utility monitor system

   Charger BAC2404

       MODBU agreement

Our services:

Measure load and calculate electricity

capacity, optimize selection of generator

capacity free of charge.

Free chare of generator room design,

make the generator best performance.

Design and implement environment safe

and noise proof project based on

customers requirement, and pass

qualified monitor reports from local

environment protection departments.

Design the most suitable approaches of

power supply; calculate reasonable cable

specifications according to special power

system status.Special vehicle for project and

maintenance driving different areas, provide

instant technique training and consultancy. Sign

maintenance agreement. Consult service for

maintenance. Fast to handle unexpected

incident and regular check-ups to save

extra expenditures.

Maintenance period:

1year after sale or 1000hours operating time.

The period is based on the earlier one.

Compliance Standards:

To BS4999/5000 pt 99,

VDE 0530,UTE5100,

NEMA MG1-22, CEMA,

IEC 34, CSAA22.2,

AS1359, BSS 5514,

ISO 3046 and ISO 8528